autolodge
Jan 19 2008, 05:25 PM
I just got back from the ER and my fibula has a spiral fracture. Lame. Anyhow, My '05 IQ 440 turned into a 600RR clone is now for sale because I get to get plates put in my leg on Monday. I have $5560 Invested in it and that is what I am asking. It is an '05 IQ440 with an '05 600 HO. The motor has 3000mi but has been inspected and runs awesome. It has oil injection using the stock 600RR oil tank. The PERC reverse is wired to the dragon button and works well. It has Brads 2" drop spindles and the Polaris large tank kit. The pipe is a stock 600RR pipe with all the brackets installed. The body is fairly clean and super straight. The only blems are the Minnesota pinstripe on the plastics, one rivet popped on the belly pan, both foot well supports show hair line cracks, the arm paint is chipped, it is missing a few studs, and there are some stud scratches in the tunnel. So far, I have put a little less than 300 miles on it and it has ran awesome. I have got the clutching almost dialed in (have the weights, haven't installed them) and have the jetting fairly close (a little low end hesitation after long Idling, probubly fuel screws). If anyone is interested, they can call my shop during the day (218)-387-1161 or my house at night (218)-387-9194. When I am a little more mobile, I will post some better pics. Thanks, Craig
Andrew486
Jan 20 2008, 10:39 AM
Aw man, you cant get a break dude! Nice sled hope she sells quick for ya!
autolodge
Jan 20 2008, 04:29 PM
Funny story, as I was laying there waiting for my buddy to go get my van, my other buddy said, "man, if it was raining pussies, you'd get hit in the mouth with a dick!" I had to laugh. Seriously though the sledding was awesome and we still have a ton of snow. Craig
gpxsrx
Jan 20 2008, 08:14 PM
Craig Im sure the sled will sell fast. Sorry to hear about your injury,that sucks. Your luck will turn around, Your buddy came up with a great line. I had a good laugh out loud and my wife said what are you laughing at, I said never mind you would probably say thats stupid.. Bruce
autolodge
Jan 24 2008, 01:14 PM
Any interest at all? I can deliver for free to the Twin Cities. Craig
autolodge
Jan 28 2008, 01:22 PM
ttt
iqsledracerx
Jan 29 2008, 06:46 PM
QUOTE(autolodge @ Jan 28 2008, 01:22 PM)

ttt
im really interested where are u located?
iqsledracerx
Jan 29 2008, 08:30 PM
QUOTE(autolodge @ Jan 24 2008, 01:14 PM)

Any interest at all? I can deliver for free to the Twin Cities. Craig
i live in ashland wisconsin i think thats closer than the twin cities?
autolodge
Jan 30 2008, 08:02 AM
QUOTE(iqsledracerx @ Jan 29 2008, 08:30 PM)

i live in ashland wisconsin i think thats closer than the twin cities?
Yup. I could meet you in Duluth. I go to the cities monthly and I will be in Duluth for my leg in the near future.
iqsledracerx
Jan 30 2008, 10:02 AM
QUOTE(autolodge @ Jan 30 2008, 08:02 AM)

Yup. I could meet you in Duluth. I go to the cities monthly and I will be in Duluth for my leg in the near future.
Well that sounds great just let me know when so i can get the money from the bank early or something.... sorry about ur leg
autolodge
Jan 30 2008, 01:13 PM
QUOTE(autolodge @ Jan 19 2008, 05:25 PM)

I just got back from the ER and my fibula has a spiral fracture. Lame. Anyhow, My '05 IQ 440 turned into a 600RR clone is now for sale because I get to get plates put in my leg on Monday. I have $5560 Invested in it and that is what I am asking. It is an '05 IQ440 with an '05 600 HO. The motor has 3000mi but has been inspected and runs awesome. It has oil injection using the stock 600RR oil tank. The PERC reverse is wired to the dragon button and works well. It has Brads 2" drop spindles and the Polaris large tank kit. The pipe is a stock 600RR pipe with all the brackets installed. The body is fairly clean and super straight. The only blems are the Minnesota pinstripe on the plastics, one rivet popped on the belly pan, both foot well supports show hair line cracks, the arm paint is chipped, it is missing a few studs, and there are some stud scratches in the tunnel. So far, I have put a little less than 300 miles on it and it has ran awesome. I have got the clutching almost dialed in (have the weights, haven't installed them) and have the jetting fairly close (a little low end hesitation after long Idling, probubly fuel screws). If anyone is interested, they can call my shop during the day (218)-387-1161 or my house at night (218)-387-9194. When I am a little more mobile, I will post some better pics. Thanks, Craig
More pics...man am I bored sitting here with my leg up....
ross040495
Jun 11 2008, 05:52 PM
can you meet me in duluth i live in upper minnesota?
autolodge
Jun 11 2008, 08:02 PM
sold this sled last winter, sorry. A nice kid from the other side of the lake bought it.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.