Bought simmons generation 1 skis for my 05 walker evans 900 fusion and they have so much bite, I can hardly turn it in trails !!!! any suggestions would be helpful thanks.

Mine too. I had Simmons on my edge, worked great. Too much on the IQ. Maybe better withe the new spindles?

Lots of guys here swear by the SLY DOG Powder Hounds on their Fusions, I will be trying a pair next season, Already spent too much on mods this season, Unless I can get em by my wiff this year. She may be merciful and let me extend my yearly mod budget and let me have them this year.

slydogs but first i would try to change from the 4 inch double carbids to maybe a 6 or 8 inch carbid and if that does not work then try changing the skis.

I've had Simmons on my sled for two seasons and they do bite hard at low speed , I run 6in all around some guys will by a set of 6's and 4's and run a combo per ski to take away some bite.I've never found this bad as I like good bite and off throttle she tracks straght where as before she was all over the place. Just go faster, it'll lighten up the front end

I BOUGHT THEM FOR 450.00 CAN THINK I WILL SELL THEM 300.00 PLEASE LET ME KNOW IF ANYONE IS INTERESTED THANKS

Put on local CRAIGSLIST.com for $390. They will fit most POOS. or see if local dealer will let you get credit for them toward some SLY DOG P/H's, mine would due to the fact they will be able to sell them to some one else.
hate to see you loose on them, they work awsome on other machines.

HRP spindles help offset the hard-steering Simmons.

They also improve the overall handling and help you lose some weight (they are a lot lighter than stock). The improved geometry of the HRP's will help regardless of what ski you use.

What colour are your Simmons skis? I might buy them, if you really plan on getting rid of them.