Hey guys I'm scrambling to get my sled back together because its actually snowing in MN. Last season I had some issues with it not shutting off and everyone told me clean the grounds but what exactly should i clean?? Any help would be appreciated.

hi there.....if your sled does not shut off......the ignition wires that go t your handle barskill, key switch, tether, should be black and a black with yellow stripe.......joined...sled dies...apart....sled runs.....black is ground.....black/yellow stripe is ign power wire......on the liting coil side....yellow is power......yellow with black stripe is ground......hope this helps....happy postin...Brian