Looking for some help guys.
Next weekend I am going to be putting on a 136" extension kit. I am also wanting to put in a 41 tooth lower gear and clutch upgrades. I have never messed around with snowmobile clutchs at all though. I did some searching and it looks like I just want to put in a Polaris almond/blue primary spring and 60 grams weighs. Seems like that is what most are reccomending. How hard is this to do? I am very mechanically inclined, but just have never seen or done it before. Anyone have some quick instructions for me? What special tools should i pick up?
thanx is advance.

Matt

super easy to change primary spring and weights without taking clutch off the sled simply remove the
clutch bolt get a large washer about 2" in diameter put it on the bolt put bolt back in now remove the six bolts on the clutch cover once they are out remove center bolt and remove cover spring will come out then change the weights.

Thanks for the advise. I'll try that next weekend when I undertake this project. I was hoping it would be as easy at that!!!!