Does any one know if you can put a longer track on an 02 1wx with out extending the tunnel, there seems to be a lot of room in the back for more track. Tony

I shortened a striker to a 128 , so you should be able to go longer

Jim where did you get your rail extensions the only ones I've seen are 136'' and I would rather go 128'' the 1wx just seems like it could benifit from a little more footprint. Why did you shorten the stryker, buy the sounds of your post you know these sleds inside out. Any info you can give me is appreciated. THANKS Tony

As I recall, blade072 did a great job with his stretch of an 02 to 136". I'm hoping to do the same to mine.

Mnes got a different suspension under it But I have to say I was never able to get the 136 to handle to my liking and I understand your delima about the 121 try some other skis and put about an eigth of an inch tow out and you will be close Im using powder pros but had good results with stock cat skis with about 8 inches on them the stock skii has a plastic keel that wont let the carbide bite as well as others

Thanks so far to those who have replied it will help me make my final decision, right now im rebuilding the m-10 the front torque arm came loose and pounded the bolt holes open. Also had a stud pushing through and it ground off the lower ilets of both off my ohlins shocks, my bro. in law welded them back up to snuff now just some grinding and a few parts and the skid will be ready. THIS IS WHY I DONT LIKE STUDS IN MY TRACKS. THANKS Tony