well my buddy and i went out netting whitefish last night and sunk his rincon. i mean good too. i never realized they can float. anyhoo, i have it ripped apart in the heated garage as we speak, (will post pics)
as of now i have the carb, airbox, exhaust off and the oil/tranny, diffs drained. am i missing anything? what a job! frig i have about 5 hours into this thing. the exhaust alone is rediculous!
any help would be much appreciated, thanks in advance!

If you haven't already, drain the gas tank and run some gas line anti-freeze/water remover through it when you fill it back up. Also spin the motor over with the spark plug removed incase any water is still in the top end.

What he said and then fill with oil, run and dump oil, change filter and repeat until the oil isn't milky anymore. If it uses a cartridge filter instead of a spin on, and you want to make things clean up faster and not spend a pile of money changing the filter every time, don't put a filter in until the oil is clean. No filter is a bad thing but i've done it before and it definetly made the whole process faster!!