I have an 05 ST that I studded. I think the studs are too short as only the very tip of the stud sticks up past the paddle on the track. I think they are 1 inch. Woodys part number 23-190. What size studs is everyone using? And how many? I have 96. I think I'm gonna go one size longer but I wanted to see what everyone else is using.

What size track is on the machine? if it is the stock 1.25" ripsaw I was Running 1.450 woodys golddiggers in mine. A 1" stud wouldnt even stick up as high as the lug if it really is a 1.25".

Carl

I have the '04 t-660 and am using 1.175 fastrac studs don't know if
the st uses the same track though.

The non STs use a 1" track. The ST should have a 1.25" if they oem tracks.

Carl

I have 05 t660 st early build with 1 inch lug. The late builds had the 1.25 ripsaw. I am going to use 168 / 1.175 studs.