Does anyone know of a good place in the Central MA souther NH area who can weld aluminum? In the process or repacking my wheel bearings yesterday I discovered that both frame rails are cracked and bent just behind the axle mounting plates on my trailer. It should be a simple job to straighted, weld, and re-inforce the area.

Any suggestions or other ideas are greatly apprecieated.

coadys garage (978-685-4138) in lawrence does aluminum trailer repair ... they just did some welding on my trailer

The same thing happened to my Sled Bed trailer. It cracked where the axle bolts went through the rails. I didn't think that a weld would hold up any better than the original tubing, so I fitted solid pieces of aluminum stock inside the rectangular tubing. So now I have solid aluminum where the axle bolts onto the rails. It's a very sturdy fix if you can find someone that can do it.

OK... That settles it.
I am not going to look at my Triton trailer, I don't wanna know now.

Yes you do!
It's a pain if you have to fix it, but it would be much worse to have the thing collapse on the highway.

I found mine when I was putting jackstands under the trailer in the spring. So I had all summer to figure out how I wanted to fix it.