i have an 01 mxz 600 and dont no what to do for bar riser?

i use the sportech guards. good mounting system and different colors to go with the sled.

powermadd makes an articulating riser that works great. i have one on my zx chassis mxz. most dealers stock them or can order one for you. i got mine from planet powersports.

To use an articulating riser you need to buy an adapter or already have a "T" style steering stem to use them. Check out Oles machine he makes riser with an angled cut so they rise straight up given you the option to go with a higher riser b/c it give your cables more room.

Just put on a powermadd regular block style one. Cheap and easy. Had a 3" on my 01 mxz and you can turn your bars up or down to where you like them and tighten it down. Dont think you can go any bigger than a 4" without extending the cables. Just an option. This is off their web site.

PM15501 1" Ski-Doo $13.95

PM15502 1" Yamaha $13.95

PM15503 2" Polaris/Arctic Cat $21.95

PM15504 2" Ski-Doo $21.95

PM15505 2" Yamaha $21.95

PM15506 3" Polaris/Arctic Cat $29.95

PM15507 3" Ski-Doo $29.95

PM15508 3" Yamaha $29.95

PM15509 1" Arctic Cat 2000 & Newer $13.95

PM15510 2" Arctic Cat 2000 & Newer $21.95

PM15511 3" Arctic Cat 2000 & Newer $29.95

PM15517 4" Polaris/Arctic Cat $34.95

PM15518 4" Ski-Doo $34.95

PM15519 4" Yamaha $34.95

PM15520 4" Arctic Cat 2000 & Newer $34.95

PM15521 5" Polaris/Arctic Cat $39.95

PM15522 5" Ski-Doo $39.95

PM15523 5" Yamaha $39.95

PM15524 5" Arctic Cat 2000 & Newer $39 any bigger than 4" without extending the cables.

I went with the pwoermadd pivot adapter and a 2 inch block. It gave me 3 1/2" of rise and was at the limit without goin with line extensions. Cost no more than 60-70 bucks for everything. Just know that your stock bar wont fit perfect because of the slight bend. Just torque the bolts down really tight.

i put a 5 inch fly riser with pivet adaptor and tag t2 bars which makes it about a total of 6.5 inch rise and never had to use throttle or brake extension