I have a garage full of 2005 and up 440-mod Sno Pro parts. Lots of mechanical parts, but NO front or rear bumpers yet. 3.0 pitch drivers, jackshafts, regular gears, slipper gears (18-19-20-43-44-46) mostly 15 wide, very few 17. Chains, sway bars, airboxes, carbs, carb boots, gas tanks, studs w/double backers and 1"nuts, rear suspension bogie wheels and mounting brackets, 50 new belts (mostly 010's-some 049's, few Speedwerx belts), clutches, fuel pumps. I'm probably forgetting a bunch, just PM me with what you're looking for and where you're from-I'll get back to you ASAP with a price for it including shipping to you. Ask if you don't see what you want--I may have it, or can probably get it (except for SEATS). I accept Paypal and can usually ship within a day or two of receiving payment. Thanks for looking!! Some stuff will also start going on Ebay. Forgot to mention--a complete, running, 2005 440 engine, fresh top end, and everything that went with it-wiring to carbs and pipe, ready to bolt in.

i am looking for the air box, the rubber pieced ripped off of mine and is taped on, let know how much if you got one

What are you asking for the 059 belts and do you have a chain for 06 snopro and how much? Thanx much

pm'ed u on 20t gear and a few questions tx

pm sent!!!

what do you have left for slipper gears and how much, also do you have a 02' 440 head or a low comp. one?

pm sent!!!

I had a chance to go through the gears and chains--here's what I have left as of this morning:

CHAINS: ALL CHAINS ARE USED--$25 each
1-74p 17w
5-74p 15w
2-72p 15w
1-72p 13w
1-70p 13w
1-68p 13w

GEARS:
2-46t 17w aluminum (NEW)
1-43t 13w aluminum (NEW)
10-46t 17w
1-20t 17w
10-46t 13w slipper
1-43t 13w slipper
1-43t 13w
8-20t 15w
3-19t 15w
3-18t 15w

$35 each on the bottom gears, and $15 each on the top ones, plus shipping.

by any chance do you have the handlebars still??

Sorry, no handlebars as of now!!

Still have a few of the BRAND NEW belts left-$30 each shipped for the 010's, $40 each shipped for the 049's

Found a few sets of the 440/mod rear side number plates--$30 each pair shipped to US.

Also found a few servo motors, lots of stuff going on Ebay now as well. 1 Team driven clutch yet.

ttt

hey do you have any extra hoods for an 05 that are in good condition?? thanks

010 belts are gone. Have a few Dayco Ultimax brand new, equivalent to the 010 Cat belts, and maybe a few 020's left as well. $40 each shipped to US, or $50 each shipped to Canada. Will also be digging through some more parts within the next couple days, and will update parts/prices soon. PM with your needs, I probably have it or can get it. Just finished with a 2006 440/F-7 EFI conversion, and will consider building/trail converting SP's to your particular wants-custom the way you want it--10 gal tank, custom U-coolers, low comp. heads, etc. Again, PM with what you want, and we can come up with a price. Calls are also welcome, 605-268-0030 cell number, call anytime... As of now I have one 2006 600 mod, one 2005 440, one 2006 440, one 2007 440, and one bare tunnel/bulkhead that will be built. Rollers are also available. Thanks for looking.

Travis

Now have a 2006 440 SP motor, fresh and all wiring, carbs, pipe, can, ECU, everything you need to drop it into your sled, complete with V-Force reeds and boost bottle as well. Will sell as a unit or will separate-let me know what you need. Also a bunch of chassis parts from a 2003 F-7 EFI-motor, wiring,ECU, and throttle bodies are gone. PM with questions. Thanks!!

I have a 2005 F-7 EFI Sno Pro motor/throttle bodies/exhaust/etc ready to bolt in to a 440 SP. The ONLY thing missing is the ECU. 1100 miles on the stuff, and a lot of the other parts of the sled up for sale too. PM with anything you may need, as I have a ton of 440/F7 parts for sale that have to go!!

Any complete snopro a-arms and spindles? 05 or newer?

No spindles or a-arms from race sno pros available-only f-7 stuff

Many parts available for the 04 and up sno pros--pm with your needs@@