CARB BOOTS ARE STARTING TO CRACK HOW THICK ARE THEY SHOULD I REPLACE OR ARE THEY STILL GOOD TO GO?

Replace them! two pieces of rubber are cheaper than an enginge rebuild.

(i´m not sure which years it conserns but some Fusions had really crappy material in the carb boots, my friend works as a Polaris mechanic and they replaced the boots on some models before they even delivered the sled to the cosumer)

Pardon a question from an amateur in the english language, is Carb boot the correct term for this piece? In Swedish we usually say just "intake rubber"

replace the rubber intake mounts and get yourself a better pair of hose clamps, the stock Poo clamps tear and rip into the rubber causing them to crack and tear.. i use two clamps from a volvo s60 turbo (has rounded edges), i think it was the intercooler hoseclamps.. good luck

i have a set of carb boots if your interested. came on a new motor and i needed pro x boots. $65 and they are yours. also has boost bottle attached.

i have an 06 600 swb and there was a recall on the boots, they put new ones on last winter.

Never heard of a recall for those ,would the 05 be the same and its on a 900 , I just ordered new ones.