Here ya go guys:

-IQ bigtank p/n 2203222 $250.00

-92 Octane head w/ clutch weights p/n 2202188 $149.19

-Timing adjuster switch(for 06' and up IQ's) p/n 4010329 $106.56

-01' Pro X needle p/n 3131109 $12.78(two needed)

Great Post Motosled.

Here are a few more for the list.

440 Oil Injection Throttle Cable p/n 7080917

600 Throttle Cable for IQ p/n 7080867

600 Choke Cable p/n 7080946

HO Oil Pump p/n 2520505

Non HO 440 Oil Pump p/n 2540054

Stock 1104 IQ Belt p/m 3211104

Extra Good 1114 IQ Belt p/n 3211114

The Good Brake Pads p/n 2202202

Hood and Side Panel Straps p/n 5433150



If anyone else have any popular Racer Chassis Part ###'s here is a good place to put them

How about the self aligning bearing?

Lower Chaincase Bearing-205 Self Aligning p/n # 3514462

Maybe a mod could pin this to the top??

How about the little clamps for the oil lines?

The little clamps are P/N 7080603. They are getting a little more difficult to get from the dealers.

The larger clamp for the line from the tank is now different than what most of us are used to. The new ones available from the dealer need a special type of Pliars to get them on and off. Our dealer had several old style untill I bought them all. Only the new style is available now unless your dealer has some older stock.. The new ones are garbage and do not work near as well.

is there one for the bogey wheel kits?

I am not sure if there is a complete kit. Here are the Part # and quanity needed for the complete kit.

7515317 Bolt 4 Usage
7515346 Screw 4 Usage
7556179 Washer, Spring 4 Usage
1590317 Asm., Wheel Bogie 4 Usage
3514303 Bearing [1 per Wheel] 4 Usage
7718407 Ring, Retaining [1 per Wheel] 4 Usage
5631065 Block, Wheel Mount 4 Usage
7542324 Nut, Nylok 4 Usage

the 07 iq440 uses a better seat mount in the front, two plates that is rivited to the seat then bolted to the tunnel

the part# 1015812 Asm., Seat Mount

you need two of them