I just bought a powermadd 2" block riser for my sks. Can I fit this on there with out having to extend any cables?? If i need to, I guess i really have no other choice but i have heard I could probably fit it. Keep in mind the bars are already up higher stock. thank you.

Michael

well how much higher than stock? If there are no aftermarket risers, etc on it the block will bolt in just fine. Go find out, its four bolts and youll know if it fits. If you have to you can reroute the throttle cable and also bend the metal part of the brakeline to gain a few inches.

i meant the bars/post on newer rmks/sks/switchbacks already come from stock with a higher set-up.

I put a 3" powermadd riser on my 04 switch without having to extend the cables. Works great.

2" shouldn't be a problem. The best way to tell is to tear into the sled and see. I put about 4.25 on my 06 with out any problem.

I put 1" on my '03 SKS, after trying the 2". There was plenty of room for both, but for me personally, the 1" was a bit too much for all day riding. On my '06 Switch 2" was the ticket. you should have no problem. might have to free up a few cables...