My 700 f111 just quit, no spark. Changed the trigger and the stator and no luck??? Have checked the wiring all but under the motor and no shorts??? Could it be the Brain???? Any suggestions before I give in and take to the dealer??

I have a 98 Mach 1, they had a problem with the wiring harnes being to short and it would rub through under the motor. Mine died a few years ago and the problem was bare wires under the motor. We pulled the motor repaired the damage and covered up the wires to protect them. It's been good for 5 years now. I was told you can install a 99 wiring harness to correct the problem.

Thanks for the info, We are about to pull the motor and take a look.

P.S Nothing against the dealers, I am just bull headed. need to find things out myself.

If you run studs they were know for ripping into the tunnel in the front ripping into the wires let me know thanks.

I will let you know, never thought of that!! We are quite busy with a storm today so we have got behind in our work, Not being able to get to the shop!!

Found broken wires leading to the DESS, Broken ground wire on the voltage regulator. Had to replace the DI box. Now it is running like a charm.