Dealer is going to install heavy hitter clutch kit on my 06 dragon has anybody had any experience with this product, i tried everything last year and nothing would get the dragon running right. Dealer already used this setup in four other 600h.o.'s and said it worked great. and comments would be great, thanks.

Do you have any spec's on the clutch setups?

Is that the two piece wieghts or the ones were you have to drill the clutch

i ran the EPI setup last year, i tried almost every combo with the springs and ran 62 gm weights (shaved) with 400 mains i between the dealer and myself we could never find a good common ground i could see top end of 102.7 on gps with 8250 rpm and absolutly no low end using the stock setup, or when i used the EPI i would have great 0-40 but top out at 97.1 and 7600 rpm.

I pretty much gave up at towards the end of last year and just set it back to stock, this year the dealer has offered to try this set up for free and see if it works. i love the sled and though i don't care about blazing top-end for the lake i won't the sled to run like it was built too. I don't have the specs of exactly what clutch set up he is going with, i was more or less curious about the the product because i couldn't find too much info on it other than supplier websites.

i believe it is the two-piece

sorry about my last post, I was thinking heel clicker not heavy hitter

I have run Heavy Hitters in almost every sled I have had since they came out XC8,PRO-X8, pro-x6/660,XC5, F7, XF7 and I LOVE EM! they are very tune-able, but they like slightly shallower start angles on the helix becasue they are so aggressive at the lower shift ratio's.
If your dealer knows how to clutch a sled, he will get them working good!

thanks thats what i was hoping to hear