RB Ditchbanger
Dec 11 2006, 08:14 PM
JUST GOT A 2006 RHINO 660, CAN ANYBODY TELL ME WHATS GOOD AND BAD ON THIS UNIT. WHAT ARE SOME OF THE CUSTOMIZING THAT HAVE BEEN DONE. ANY INFO IS GOOD INFO. THANKS RB
dinoindetroit
Dec 12 2006, 10:09 AM
I got a 06, 660 about 60 days ago,, I added a Dr D muffler, but It was so loud, I put a quiet core in it, I also added 28 inch mud lites on ITP rims, and a ramsey 5000 lb winch, a wind shield and a American Eagle 72in plow,,, I killed my power with adding the 28in tires,,If I had it to do over I would buy the open exaust tip from ebay for the stock exaust, and put on 26in terra cross tires, these things are jetted from the factory real lean, I am going to open the air box and jet the carb to a 157.5 or 160 main and pull the plug on the air fuel mixture screw, and open it a bit , and add the CDI box from Hunter works.com ,, dont buy a Procom CDI box, they are trouble, some work some dont, you need a CDI box, it bumps up the rev limiter 1000 rpm, because of my big tires I have to add a clutch kit, these things get expensave,, where you at in Michigan??
RB Ditchbanger
Dec 12 2006, 03:42 PM
GRAND RAPIDS AREA, THANKS FOR TH INFO ANY LITTLE HELPS.......
Octane
Dec 12 2006, 06:33 PM
You can go pretty crazy modding up a Rhino. Theres a supercharger kit for it that claims to get it up to 60 hp.
You can also get bigwheel kits and track kits. The potential for modifying a Rhino is limited only by your bank account.
Theres lots of good things about the Rhino (too many to list really), but the only real downside is that its a little lacking in power off the line with the stock clutching.