I Have a 3in riser on my 03 XCSP. I had a pipe over the gap. I did not like the look.
So I saw that the switchback and new 2007 super sport have a taller plastic filler piece than mine. So I bought one. The angle is off on the new one :banghead: :banghead: :banghead: Does anyone know how I can fix this. What is the differance in the steering colum :banghead: Please help I know this topic has been posted before. I need some help Thanks

Click to view attachmentThis is the pic of my trouble

ussally you can only go 2" riser, and yours looks to be a 3" riser block, you need a riser that goes up and forward,

Click to view attachment :banana: :fluffy: I fixed it!! I cut off 1/4 inch at a angle on the bottom of the riser. I had to cut some of the rmk boot so the riser would not hit. Looks better than the drian pipe I used before. I also shimmed the steering post 1/8 in behind the grease fitting block.