going through a buddies 00 xcr and came up with a list of things i need. I'm going to order it all new from a dealer or SLP but if anyone has any of this send me a pm quick.probably order new on thursday.
Need:
front motor mounts
torque link(for lf)SLP ?
factory torque stop
Almond round primary spring
blue /orange sec. spring
1 hood cable
2 seat snaps
drive axle bearing
136" tunnel extension and side plastic trim
VES bellows (may need a valve also if it breaks while changing bellows)
water pump seals and bearings
crank seals

ckck4@mwci.net

Craig,

If you break the stud on the ves valve when taking it apart you can drill and tap the valve and put a stud in it.
I managed to find a metric tap of the same pitch, made a stud out of a metric bolt by cutting the threaded part to length.

2 of my 3 are like this right now.

If you break one and still want new, I'm interested in the broken valve.

Also if you have liberty 700/800 belows sitting around they work fine also, all 3 of mine are off a late model twin.

Al

Thanks for the tip Al. I've also done the "stud" thing to the valve stem on this sled a few years back. Crappy design !

Craig I got 3 Blades.. on the shelf..