Help - Search - Members - Calendar
Full Version: 99 T-Cat who's do you recomend to do a great rebuild??
HCS Snowmobile Forums > State and Province Snowmobile Forums > Canadian Snowmobile Forums > Ontario

Toiletboy
I am looking to get a rebuild on my 99 T-Cat.
Does anyone know of a great person/Company in the Shelburne/Orangeville area you would recomend?

I have about 8500 miles on the engine and it probably could use a refresh. The comp. test shows it to be down to abut 115-120.

If you are recomending yourself, what is your ballpark quote.

Thanks

Toiletboy!
:no_bashing: :div20:
vooodooo
Denny at TSR.

www.tsrltd.com
eric Phazer485
you could go to warp 9 but it would be expensive.

you could do it yourself, its not a hard thing to do.

id even be willing to do it and give the carbs a good cleaning for a little more then the piston kit costs.
Scooter Magavin
QUOTE(Toiletboy @ Oct 15 2006, 01:35 AM) *
I am looking to get a rebuild on my 99 T-Cat.
Does anyone know of a great person/Company in the Shelburne/Orangeville area you would recomend?

I have about 8500 miles on the engine and it probably could use a refresh. The comp. test shows it to be down to abut 115-120.

If you are recomending yourself, what is your ballpark quote.

Thanks

Toiletboy!
:no_bashing: :div20:


WOW! 8500 miles and no balance shaft bearing failure? Thats impressive.
can-amsledder
I haven’t had a Cat for a while but it use to be Arnies Cat House that did good work.

Now that I think about it, are they even a dealer anymore?
hate2looz
QUOTE(can-amsledder @ Oct 15 2006, 01:55 PM) *
I haven’t had a Cat for a while but it use to be Arnies Cat House that did good work.

Now that I think about it, are they even a dealer anymore?

No he isn't anymore, but I'm pretty sure he remembers how to fix and mod the stuff. grinning-smiley-023.gif
thundercat900
Just buy the service manual for your sled. Its super easy and can be done in a day. Id buy 3 SPI piston kits and a full gasket kit. Disasemble the motor, check all bearings on crank and inspect counter balance(send out if bad) and rebuild the water pump. Would save yourself a ton of money that you could use on making it even faster :banana:
ScottyR
You have a good Cat dealer at your doorstep with Warp 9. Why not just take it there?
Seguin Interceptor
QUOTE(hate2looz @ Oct 15 2006, 03:08 PM) *
No he isn't anymore, but I'm pretty sure he remembers how to fix and mod the stuff. grinning-smiley-023.gif


What is he doing these days? I drive by there all the time. He still has some sleds kicking around out front. I heard he lost the dealership a while back.
87gtNOS
I can do it. Crank and balance shaft too.
73ss_elanman
If youre just talking about freshening up the engine with a new top end, I vote for do it yourself. Last year I put piston kits in my 1990 indy and new head/base gasket. Foolish me didn't clean the mikunis before the season, and moisture in the bowls ran it lean on the pto side. I guess i am so used to the old tillotsons. But it took 3 hours tops to do everything, including a carb cleaning, and it was $59 each for the piston kits and around $45 for the gasket set. So for under $200 i did it myself and it runs excellent. ran better than all the 2005's i rode with this winter and its a 1990!

Wade
BURWELL
Arnie is into turbo diesel motors.
He is running sled asphalt drags and still can build a 3 plug for what ever your need. Good to deal with. He also has every possible Cat part you will every need IN STOCK. No longer a Cat Dealer but still services Cat sleds.
Toiletboy
Thanks Everyone!!


Took it to Arnie's.
87gtNOS
QUOTE(Toiletboy @ Oct 26 2006, 08:23 PM) *
Thanks Everyone!!
Took it to Arnie's.


GREAT CHOICE!!
PLEASE keep us updated!!! I need some sort of excitement in my life....
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2009 Invision Power Services, Inc.