Just picked one up as a spare I know there old but there good. any clutching ideas... thanks

What are you looking to clutch it for ?

Lake running ?
Sno X / Play riding ?

I have a complete Sno X / Play set up that uses all factory AC parts. I will have to go out to the garage and get my notes.

I got all the specs right from AC Race dept. I could hold off a Mach Z up till about the century mark.

BTW its for a 98 Sno Pro but should work also, the 97 and 98 were close in hp.

Keep in touch

Flash-n-Flare

yellow/white, B/M 46 weights, stock yellow secondary and a 55-53. Use a 55-50 if you want some more revs on the backside to build more MPH. 330-340 mains will keep it healthy, 27.5 pilots to clean up the low-end. Turn down the oil pump, best to leave the heads alone. Make sure pipe has been drilled and welded per the Performance Manual.

hugh. I don't have a performance manuel for this year. What do you mean drill and weld the pipe??

think that clutch set up would be good 4 a 95 zr440?

will it be ok to drop to a 27.5, coming from stock of 35?
and what is the drilling/welding the exhaust.
also anybody have a 97 performance manuel, they want to get rid of, if so let me know the price.