I am looking for a supplier for a higher compression head gasket for a 1995 Fuji 250 fan single lunger. A Fuji 500 fan should be the same bolt pattern. Also interested in a set of twin pipes for a fuji 500 if anyone has them laying around.

try here for the gasket, www.hpd-inc.com.

or, just cut the head .020".

twin pipes won't do squat for the 500 unless yo run higher compression, port the cyls, and bump the timing.

if it's an older 500, switch to a '96-'97 pipe and thin head gasket.