I am not on HCS very often.. But I am a regular on snowmobilefanatics.

For you ZRT guys/girls.. I thought I would share my project.. Here is the thread, I update it all the time

http://www.snowmobilefanatics.com/forum/to...?TOPIC_ID=31874

No bites?

Here is a teaser.. got this video done last night

http://www.youtube.com/watch?v=ro9cY8bj1NQ

sounds good :div20:

is it hitting on all three?looks like the pto side is dead.

my text on the side of the video says "I think the PTO cylider died after it started"

I am going to change the plugs soon and retest.

I didn't bleed the air out of the oil lines. So I put 2 gallons premixed in it and filled the oil tank with oil. So, its running rich. After them 2 gallons are gone I am assuming the thing will have no air bubbles in the oil line anymore.

Sounds good man. Now all you need to do is mod the front suspension and you'll have one mean trail masher!!

1-Fill the oil resevoir with oil.
2-Start the sled and let it idle; use a piece of stiff wire and pull the oil pump control arm all the way up.
3-When the oil flows through the hoses bubble free, the system is bled and full of oil.

Thanks for the reply, I will do that. But at the moment I am on the couch with the flu.. damn! thanks guys