wat helix works beat in fusion for 660 2 stage or 3 have stock helix now

Nobody must not be racing the Fusions like you are Demon??

must have a good one :smilielol: :smilielol: :div20: :beerchug: :burp:

Run a stock 600 cam. It's too much cam for the stock 600 to begin with.

Run Red-Blue spring in the driven.

Bump up your weights on your drive (try 11-64's first) and run an almond spring.

If you can find a 165-310 titanimum drive spring, I would try that.

I was running the 719 team helix last year with my 660 and a red/black spring. Had good luck with a 66/44.56 SLP cut also. Used 10-64 weights along with an almond round primary. Motor turned 8200rpm.

I belive he's looking for a helix for his 900 Fusion for 660 drag races.

LOL...his post was clear as mud!

:smilielol: :drunk:

A little bit of a type-o eh Reddeom. No he is looking for best helix to run a 900 Fusion in 660ft boys. Someone must have played around with them.

more like no one wants to give it up. those of us that have it figured out have spent countless hours testing and buying part after part. heres a start: 24-38 gears, i like the 66/42/.36, red/pink, series 11 weights to suit. if you are going to mod the motor this may change, but it will get you started.

is that stock helix put air box slp haeds pipe tuning 7850 on top 76 grams set up for 500 feet on grass :div20: :beerchug: