If someone has a M-Series sled convenient would there be any chance you could measure the height of the M-Series seat(from base/area it would sit on-top of the tunnel) to the area where your butt would sit?

Thanks, :div20:
-John

The seat measure's 9" in the front and 11" in the back. Those measurements are from the bottom to the top. Hope this helps.

Henken,
Thanks, that is helpful. So, is the rear that you measured at 11" at the very back of the seat, just above the opening for the storage access?

Thanks,
-John

This should help The back measurement is between 11 1/8 - 11 1/4 I threw a piece of wood on the back of the seat and measured from the bottom of the board to the tunnel. Should be pretty close

Thanks Henken! :div20:

-John

Looking for another favor/picture...... If anyone has an 06 M-series handy and can take a close-up picture of the hood crest decal(decal in the center of the hood that says "ARCTIC CAT" on both sides of it) it would be MUCH appreciated. I'm most interested in getting the detailed size of the "ARCTIC CAT" lettering of this specific decal.

Thanks,
-John