The machine stalls while i'm driving at any speed sometimes,it seems maybe the
throttle botton failure, but not sure how to test it.
I changed fuel filter and still same problem.i'm thinking it could be the tps with
flat spot or fuel pump.
If i hold the throttle in the same possition when it fails the machine will stop,but if i let go momentarilly then squeeze the throttle again the machine will go for while again,it never stopped and not started yet,it idles and runs fine sometimes.

PLEASE <PM> ME AS SOON AS POSSIBLE WITH ANY THING TO TRY,
NEED MACHINE FOR THE NEXT 2 WEEKS,

LAKE WINNIPEG,MAN

I but new bear cat W/T 660 turo and reverse bro down 2 time and sent my slad for repair all sumer just have back and dide de same repair artic cat sed to my coming out whit kit for repair

I but new bear cat W/T 660 turo and reverse bro down 2 time and sent my slad for repair all sumer just have back and dide de same repair artic cat sed to my coming out whit kit for repair

TRY THE LINKAGE SET UP SOUNDS LIKE IT IS OFF TO ME, JUST GOT A 2007 BC, STILL IN MY SHOP [GARGE]WHAT KIND OF MILAGE DO YOU GET WITH THAT BEAR CAT IS IT THE 570 OR THE 66O OR THE T660 ?

went through this last year "throttle safety switch"

Yes found the problem,it was the throttle saftey switch.Thanks for getting back.
I took the switch apart to find that one side of the brass contact was worn and the other was fine.
I'am taking it back to the dealer,looks like a fault from factory.Only 3000km on machine.

glad you found the problem an got it fixed Sid

The bastards wouldn't cover it. Had to buy it.