Anybody change out the standard crossfire springs to the heavier spring or even the sno pro springs i bought the heavier springs was hoping they wouldnt bottom out like the standards and not as harsh as the sno pro . I have not installed these yet because i might even exchange them for the sno pro spring if i hear the heavier one are to soft . Thank in advance for any info

i changed out the snow pro springs for the hever ones now i think i went to heavy i'm takeing hard shot that i would of not felt on the other springs i'm gouing to leave them in for the start of next year to see if they loosen up

I replaced the front arm spring (135 lb/in) in the rear suspension with the SP one (190 lb/in) to reduce bottoming of the front arm.....works perfectly.

I backed off the preload so it's actually softer for the 1st half of the travel, after that it becomes stiffer due to the higher rate.

I guess i didnt realize there was a heavier spring than the sno pro springs i have a standard and bought the springs that are in between the sno pro springs and the standard springs what springs are you talking about .