Should the resevior be on top or botom of the shock when mounted on the sled. (on the seat side or on the ground side) This is on an 02 ZR 600 CC EFI.


Thanks

Bottom.
Remember how difficult it was to get your hand in there to turn the clicker. :div20:

I use the screw driver from the right side to turn the clicker just hit the grooves with the tip of screw driver and push works good w/ ice build up

Thanks. I got it back on. I had the shock re-valved, but I was a little uhh under the weather when I pulled it off and could not remember how it went back on.

Thanks again

:div20:

Pay special attention to the lower arm, very easy to install the shock with the arm flipped. Easy to tell by checking for proper track clearance.