i have a 2001 zr 600 efi and iam putting m-to under it and i dont know what im doing can anyone help. and i dont have the money to have it put in.

do you mean M-10? i think its just a bolt in sorta thing.....if the holes dont line up then its not for that sled.

Actually they make special brackets that attach to the bulkhead for m-10's for certain sleds, and i think yours is one. The geometry of the shocks and tourque arms are different than a regular suspension. I think you can call m-10 if thats what your installing and get set up sheets and info. I would say it should only take a few hours.

i got the mount kit cause it did take a serting kit. but i need help installing it.

My first sled came to me in six banana boxes.
Look at your fasteners-collect the tools
then sit back and start puttin stuff together
eventually it will look like something that will work.
Its not rocket science----just a sled.
Take your time and use your head-it'll come together.

if you dont have the installation instructions for the m-10----- dont install it. If you dont place the doubler brackets in the tunnel in the correct location, your suspension will bind up and you will never get it to work properly.

call fast, or compeaus, or cc skidoo and see if they can help you get the directions. take very careful measurements.

i have attatched a pic of my m-10 ace installed in my mountain sled,, it is set back and extended. lots of math involved!

Hey wheelz, welcome to the forum, and...SWEET sled!! :div20: Can you tell me where Baldy is that you refer to in your profile? Only Baldy I know of is in Eagle River. Thanks, Joe

baldy is a mountain by hatchers pass.......i live right next to it

cool...thanks