Guys:

If you could help me out with a few torque specs it would be greatly appreciated.

We are finally getting around to taking our clutches apart tomorrow night. As a result we will need some torque specs for the reassembly:

1. Cover bolts
2. Spider Jam Nut - I think it is very big
3. Spider - is there one - or do you just get it as tight as possible with it lined up properly?
4. Weight Pins

Thanks guys.

Spider 200 ft lbs RMK 230-250 ft lbs
jamnut 235 RMK 200
weight pin 30 inch lbs
cover bolts 90 inch lbs
The RMK specs are for the 800 RMK only.

Paul:

Thank you very much!!