I just purchased a 2005 Edge suspension to put under my 1999 XC 700. It is an XC SP skid with a Fox PS3 position sensitive rear shock, and a Ryde FX front shock. I don't know anything about the Fox PS3 shock. Any pointers to putting this thing in?? Thanks!

If you have the dimensions you're going to need, it's pretty straightforward. Measure twice, drill once!

One mistake I hear a lot are guys trying to install suspension with rear springs tensioned. Much easier if that is done after bolts are all in. The other has to do with the short link at the front of the rear shock. It should be standing up, good for a headache and some sore muscles trying to install with it laying down. Good luck.

do you have your dimensions? They are on my web site under tech related if you need it. Make sure that you move the steel plates as new holes in the aluminum alone won't hold it. The only extra step is if you have heat exchangers on the running boards whoch I don't think you do.