installing unknowen year prox rear suspension in a2000 700 xcsp gen2 ,having trouble getting skid bolted up with my new holes .anybody do this before and have proper measrments.how to set suspension once installed would help to. thanks

I have done it. I thought I had the specs posted on my sight but I see they are not. I will check for my notes when I am in the shop later today. If you post a picture of the skid we can probably narrow down the year.

picture not possible at this time.it does not have any bogie wheels except the rear,has walker remote resoivor shocks, no clickers. has torsion springs so it is not a 2000 44o pro x skid.maybe 01 skid? jb shock how about a phone # interested in having you rebuild the shocks

2001 Has tsl's on the front arm. All other years do not. 2002 has 2 sets of holes at the bottom of the front arm that can be used to change the skid geometry.

don't know what yoou mean by tsl's but it does have two set of holes in frt arm so it must be a 02 pro x skid . what happens when changing mounting holes in frt arm.its in lower holes now.

I can't find all of my specs for the mounting holes front to rear is 63 mm that is the most critical. Do you need the other measurements as well? TSL is torque sensing link which are the aluminum arms like the rear arm has on it.

it does not have any alum. links on it just the steel rods running along bottom of rear shock mount to top of rear arm. yes i need all measrments 63mm cann't be right,that is just a little over two and one half-inchs i think ,25.4 mm to inch if i'am right