http://www.partsland.com/index.cgi?N=11315...AIL-DRIVE-TRAIN

look at the pick and tell me if the chassis goes between 12 and the other 12 like the xc's and pro x-s? or does it go infront of part 31 like how i took it apart? this makes it hard to take apart as you have to remove the bearing before you can get the driveshaft out. was it put together wrong or are the evolved different??
its a 96 trail thnks

you need to take the chain case apart and remove the lower nut so you can slide the drive shaft and bearing through the hole that those plates close off that you took off already. Hopefully the bearing behind the speedo is still good and has been greased regularly. You should only need to take off the bearing if it is wasted. It needs to be pressed on and off.