Gearing?

Polariskid22 · 12-17-2011, 02:00 PM

What should i get for gearing. I want to have my sled stand up straight when I grab the throttle. I have a 1.75 ripsaw on my sled.

mudripper76 · 12-17-2011, 02:38 PM

22/40 and you can use stock chain, should give you some more low end grunt, however my 600 fusion with stock gearing will do that because I spent alot of time getting the air and fuel and timing pretty much perfected. I don't have to stand on the back of the sled to do it either and I'm running an 1 1/4 rip

HSR · 12-17-2011, 03:45 PM

The ability to make a sled stand up isn't acheived just by putting lower gearing in it requires suspension changes that make the sled a POS to trail ride.Pull the RRSS right out,springs on low that sorta thing.Again kiss your fast trail riding good bye

Polariskid22 · 12-17-2011, 04:02 PM

Quote:

Originally Posted by HSR

The ability to make a sled stand up isn't acheived just by putting lower gearing in it requires suspension changes that make the sled a POS to trail ride.Pull the RRSS right out,springs on low that sorta thing.Again kiss your fast trail riding good bye

I dont trail ride haha. And yes I know its more then gearing. i already can make it stand straight up i just want to make it a little easier. This is just my play sled. I race with my iqr.

ConFusion · 12-17-2011, 04:10 PM

If your up....................... your not going forward

Pitboyz · 12-17-2011, 06:09 PM

If you have an iqr, then you should know what would make it stand up....I just did gearing to mine and I have to disagree with HSR, the ability to get it to stand straight up with only gearing, is def achievable.

HSR · 12-17-2011, 06:31 PM

I don't care if you geared it 3:1 if your suspension isn't set up for it it WILL NOT stand up on end.Put your RRSS on high for the most coupling and see what happens.He isn't talking about an IQr.

mudripper76 · 12-17-2011, 08:03 PM

I did not have to set up my suspension to do wheelies, it is set up for trail riding but it has enough snort now that if you stand up and pull back when you punch it, it will stand straight on end, if I'm sitting on it in the rider forward position it launches hard and just dangles the skis, if you know how to ride and you have enough hp you can get it to stand up. I have the springs set hard and coupling blocks in and the straps in stock position, I can stand it up at will.

PolarisCAM40 · 12-18-2011, 09:08 PM

I got a 1.5 oem, 22/40 gearing, limiters all the way out, torsions on medium, whats that likely hood of getting her to kiss the sky?

12-17-2011, 02:00 PM	#1 (permalink)
Polariskid22 Super Advanced Member Join Date: Nov 2011 Posts: 171 Current Sled(s): Polaris IQR Previous Sled(s): Pro xr Iq 660 Fusion 600 Location: Vermont Favorite Riding Area: Track or Back Country Mountain	Gearing? What should i get for gearing. I want to have my sled stand up straight when I grab the throttle. I have a 1.75 ripsaw on my sled. __________________ "Fuck Fear Just Pin It!"

12-17-2011, 04:10 PM	#5 (permalink)
ConFusion Super Advanced Member Join Date: Mar 2005 Posts: 474	If your up....................... your not going forward __________________ Anything worth doing is worth over doing! Bad looks good when worse arrives!

12-17-2011, 06:09 PM	#6 (permalink)
Pitboyz Super Advanced Member Join Date: Nov 2007 Posts: 830 Current Sled(s): 600 fusion mod Location: Haliburton Age: 21 Riding Since: 3	If you have an iqr, then you should know what would make it stand up....I just did gearing to mine and I have to disagree with HSR, the ability to get it to stand straight up with only gearing, is def achievable. __________________ Throttles on the right, pin it and don't let go.

12-18-2011, 09:08 PM	#9 (permalink)
PolarisCAM40 Super Advanced Member Join Date: Oct 2010 Posts: 341 Current Sled(s): 06' Polaris 600H.O. Fusion <3 Previous Sled(s): 02' Po 600 xcsp;05' Skidoo Freestyle 300 Location: Madison, Maine Favorite Riding Area: Moosehead lake region, ME 11-12 Mileage: Not enough 10-11 Mileage: 900 or so Age: 18 Riding Since: 2000	I got a 1.5 oem, 22/40 gearing, limiters all the way out, torsions on medium, whats that likely hood of getting her to kiss the sky? __________________ Slow and steady wins the race. Learned my lesson, have you? 2006 Fusion 600 1.5" paddle track / C&A pro skis / SLP Air Horn Kit / 5" RSI handlebar risers / 22/40 gearing, 10-64 primary weights, blue spring(?), stock helix and spring secondary

12-17-2011, 02:38 PM	#2 (permalink)
mudripper76 Super Advanced Member Join Date: Mar 2009 Posts: 307 Current Sled(s): 06 fusion dragon 600 xr Previous Sled(s): 05 f7 efi ext, 05 zr 900, 03 440 sno pro, 97 xc 600 Location: Walker,MN Favorite Riding Area: ditches, highlines, 10-11 Mileage: 1600 Age: 34 Riding Since: 1988	22/40 and you can use stock chain, should give you some more low end grunt, however my 600 fusion with stock gearing will do that because I spent alot of time getting the air and fuel and timing pretty much perfected. I don't have to stand on the back of the sled to do it either and I'm running an 1 1/4 rip

12-17-2011, 03:45 PM	#3 (permalink)
HSR Super Moderator Join Date: Feb 2005 Posts: 6,158 Current Sled(s): polaris Location: Atikokan Ontario Favorite Riding Area: snow Age: 41	The ability to make a sled stand up isn't acheived just by putting lower gearing in it requires suspension changes that make the sled a POS to trail ride.Pull the RRSS right out,springs on low that sorta thing.Again kiss your fast trail riding good bye

12-17-2011, 06:31 PM	#7 (permalink)
HSR Super Moderator Join Date: Feb 2005 Posts: 6,158 Current Sled(s): polaris Location: Atikokan Ontario Favorite Riding Area: snow Age: 41	I don't care if you geared it 3:1 if your suspension isn't set up for it it WILL NOT stand up on end.Put your RRSS on high for the most coupling and see what happens.He isn't talking about an IQr.

12-17-2011, 08:03 PM	#8 (permalink)
mudripper76 Super Advanced Member Join Date: Mar 2009 Posts: 307 Current Sled(s): 06 fusion dragon 600 xr Previous Sled(s): 05 f7 efi ext, 05 zr 900, 03 440 sno pro, 97 xc 600 Location: Walker,MN Favorite Riding Area: ditches, highlines, 10-11 Mileage: 1600 Age: 34 Riding Since: 1988	I did not have to set up my suspension to do wheelies, it is set up for trail riding but it has enough snort now that if you stand up and pull back when you punch it, it will stand straight on end, if I'm sitting on it in the rider forward position it launches hard and just dangles the skis, if you know how to ride and you have enough hp you can get it to stand up. I have the springs set hard and coupling blocks in and the straps in stock position, I can stand it up at will.

Remove Advertisements Sponsored Links
Hardcore Sledder Snowmobile Forums Advertisement