|Phazer This is a brand-specific forum. Posts on this forum are assumed to be questions aimed at similar model owners, and are not looking for comments of a sarcastic or "bashing" nature. Please be aware that if you violate this policy you are in danger of losing your posting privileges on this website.The calling out or posting of another members personal information IE phone number or address is prohibited.|
|12-10-2010, 11:23 PM||#1 (permalink)|
Super Advanced Member
Join Date: Feb 2008
Current Sled(s): 07 Phazer FX
12-13 Mileage: 50
11-12 Mileage: 800
10-11 Mileage: 1500
Yamaha Phazer Error Codes
Code 11: Cylinder identification sensor or circuit problem.
Code 12: Crankshaft sensor or circuit problem
Code 13: Intake pressure sensor or circuit problem on Cylinder #1.
Code 25: Intake pressure sensor or circuit problem on Cylinder #2.
Code 14: Intake pressure sensor hose problem. Hose is detached, loose, plugged, pinched, etc on Cylinder #1.
Code 26: Intake pressure sensor hose problem. Hose is detached, loose, plugged, pinched, etc on Cylinder #2.
Code 15: Throttle position sensor or circuit problem.
Code 16: Throttle position sensor is not moving.
Code 21: Coolant temp sensor or circuit problem.
Code 22: Intake temp sensor or circuit problem.
Code 30: Oil pressure sensor or circuit senses low engine oil pressure. ECU turns off main relay and stops engine.
Code 33: Open circuit in the primary circuit of the Cylidner #1 ignition coil.
Code 34: Open circuit in the primary circuit of the Cylinder #2 ignition coil.
Code 42: Speed sensor or circuit problem.
Code 43: ECU unable to monitor system voltage due to an open or short circuit in fuel system circuit.
Code 44: Internal ECU problem with CO setting or adjustment mode.
Code 46: System voltage is too high or too low.
Code 50: ECU internal memory or data problem.
Code 65: Knock sensor or circuit problem.
Code 81: Grip warmer open or short circuit.
Code 83: Thum warmer open or short circuit.
Code 84: TORS system has been activated.
Code 85: Short or open circuit in oil pressure switch.
Code 88: Short or open circuit in reverse indicator switch.
Buy the biggest one you can afford, you can always let off the throttle!!!!
Crawford Racing #14 Yamaha Phazer FX
Team Upnorth outdoor sports
Toyota--Moving you forward, even when you don't want to....
|02-01-2011, 02:47 PM||#2 (permalink)|
Join Date: Feb 2011
2007 Phazer Error Code
I have a 2007 Fuel Ignition System error code as well as a blinking caution light. The sled will not turn over. It won't do anything. The fuel pump does not even come on to prime. I cannot figure out the problem. Can anyone help.
|03-27-2014, 01:20 PM||#7 (permalink)|
HCS Lifetime Premium
Join Date: Feb 2012
Current Sled(s): 09 Nytro RTX SE, 16 Pro S Switchback
Previous Sled(s): 07 Phazer FX and GT, 09 Nytro RTX
Location: East Syracuse, NY
Favorite Riding Area: CNY
14-15 Mileage: 1565
13-14 Mileage: 1450
12-13 Mileage: 1200ish
11-12 Mileage: 560
10-11 Mileage: 1300ish
Riding Since: 2007
have your airbox off recently??
|02-10-2015, 08:42 PM||#8 (permalink)|
Super Advanced Member
Join Date: Jan 2007
Current Sled(s): 09 Phazer MTX 79 Exciter 440
Location: STE ANNE MB
Riding Since: 1984
I have a 2009 phazer mtx, this past weekend had a stalling problem. Engine code 34 came up. The company I bought it from included a warranty with the sled, and ordered a new coil. Turns out my coil was not the problem, it was the plug that comes from the harness at the coil, they replaced the plug, runs good now. Just thought I would share. Ride safe!
Last edited by fire88; 02-10-2015 at 08:44 PM.