Ski-Doo clutch removal - HCS Snowmobile Forums

General Snowmobile Forum This is a serious discussion forum and a 100% NO BASHING ZONE. This area is here for members who are looking for serious answers for serious questions or discussion and are not looking for comments of a sarcastic or "bashing" nature. Please be aware that if you violate this policy you are in danger of losing your posting privileges on this website Without Warning.The calling out or posting of another members user name in the title of a thread a members personal information IE phone number or address is prohibited. Sharing of private messages from site staff is against site rules and will be subject to banning from site temporarily or permanently.

Reply
 
LinkBack Thread Tools
Old 11-02-2006, 06:25 PM   #1 (permalink)
Newbie
 
Join Date: Nov 2006
Posts: 2
Default

Does anybody have any experience removing Ski-doo clutches? I pulled the main clutch off my 99 ski-doo f3, then took a puller to the fixed disc on the drive clutch. Ouch! Now it's in pieces. The shop manual seems
to show the shaft attached to it, so I assume the shaft has to come off. The transmission is on the motor, and the motor is still on the sled. I just need to replace the ring gear. Any help is appreciated, as would be a used fixed disc!

THX
Tom
tganley1 is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 11-02-2006, 06:30 PM   #2 (permalink)
Super Advanced Member
 
dasledhed's Avatar
 
Join Date: Dec 2004
Posts: 1,577
Location: buffalo ny
Default

I dont understand. You pulled the primary clutch off and split it? Transmission?
dasledhed is offline   Reply With Quote
Old 11-03-2006, 12:11 PM   #3 (permalink)
Super Advanced Member
 
Join Date: May 2006
Posts: 465
Default

what are you trying to do?
skidoo TRA drive clutches come off with a puller tool (like all drive clutches).
once you remove the drive clutch spring, the clutch will come apart.
__________________
'06 Skidoo GTX 500ss
'83 Skidoo Blizzard 9700
'82 Skidoo Blizzard 9500
'81 Skidoo Blizzard 9500
'80 Motoski Supersonic
(2) '77 Yamaha SRX 440's
'75 Yamaha GPX 433
'77 Arctic Kitty Cat
'71 Arctic Panther 399
'71 Arctic Puma 399
snoeproe is offline   Reply With Quote
Old 11-03-2006, 12:25 PM   #4 (permalink)
Super Advanced Member
 
FIREBALL 440's Avatar
 
Join Date: Mar 2006
Posts: 26,104
Current Sled(s): 03 REV 600ho
Previous Sled(s): 03 ZX 600ho
Location: Two Harbors MN
13-14 Mileage: 1250
12-13 Mileage: 1270
Age: 37
Blog Entries: 12
Default

...and welcome to HCS.
__________________
"...and I was like braap braap almost hit a fuckin tree, like fuckin braaap brap brap braaaaaaap..."
FIREBALL 440 is offline   Reply With Quote
Old 11-03-2006, 12:53 PM   #5 (permalink)
Super Advanced Member
 
bt260's Avatar
 
Join Date: Jun 2006
Posts: 653
Location: CNY
Default

Sounds like he only removed the moveable sheave of the clutch and then used an ordinary gear puller on the fixed sheave, a mistake that will cost a couple hundred bucks to fix. The problem now is removing the rest of the sheave from the PTO ond of the crank, not fun with no puller threads. Probably the easiest way is to cut through it with a die grinder, taking great caution not to damage the crank itself. Good luck with that one.
bt260 is offline   Reply With Quote
Old 11-03-2006, 05:31 PM   #6 (permalink)
Super Advanced Member
 
dasledhed's Avatar
 
Join Date: Dec 2004
Posts: 1,577
Location: buffalo ny
Default

Ohh.....i couldnt make any sense out of that post.Yea,thats not good.
dasledhed is offline   Reply With Quote
Old 11-03-2006, 10:25 PM   #7 (permalink)
Newbie
 
Join Date: Nov 2006
Posts: 2
Default

Hey Folks,

thanx for responding. Yeah, got the sprint off, then the outer portion of the clutch.
The fixed disc was still on the crank. I was trying to remove it to add a ring gear for a new electric start.
It doesn't seem like brain surgery, as there are a dozen of them on EBAY, but all the discs seem to have the shaft attached. Doesn't sem to be the crank, seems to be a split shaft, that comes off right behind the fixed disc.
ALL ON EBAY SEEM TO HAVE THE SHAFT ATTACHED.
tganley1 is offline   Reply With Quote
Old 11-03-2006, 10:28 PM   #8 (permalink)
Super Moderator
 
XCR1250's Avatar
 
Join Date: Oct 2005
Posts: 27,865
Current Sled(s): XCR 800
Previous Sled(s): O.M. 1000, XCR 1253, XC1214, P.S.700
Location: Sawyer county Wisconsin
Favorite Riding Area: N.W. Wisconsin
13-14 Mileage: 1,864
12-13 Mileage: 767
Riding Since: 1959
Default

Discs? You must mean "sheaves"
XCR1250 is offline   Reply With Quote
Old 11-04-2006, 10:17 AM   #9 (permalink)
Super Advanced Member
 
Join Date: May 2006
Posts: 465
Default

get yourself a clutch puller tool for the TRA. this is easy with the correct tool
__________________
'06 Skidoo GTX 500ss
'83 Skidoo Blizzard 9700
'82 Skidoo Blizzard 9500
'81 Skidoo Blizzard 9500
'80 Motoski Supersonic
(2) '77 Yamaha SRX 440's
'75 Yamaha GPX 433
'77 Arctic Kitty Cat
'71 Arctic Panther 399
'71 Arctic Puma 399
snoeproe is offline   Reply With Quote
Old 11-04-2006, 08:32 PM   #10 (permalink)
Super Advanced Member
 
dasledhed's Avatar
 
Join Date: Dec 2004
Posts: 1,577
Location: buffalo ny
Default

The sheave that is on the crank does have the shaft with the spline attached if thats what your asking.You have to buy a clutch puller and the whole thing will come off,its on a taper.
dasledhed is offline   Reply With Quote
Sponsored Links
Advertisement
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 09:21 AM.



Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0