2010 Shift 600

Stinkey · 02-22-2012, 12:19 AM

Hey guys I have the oppertunity to pick up a snow cross track studded and ready to go for $150. Before I buy the track I have a few questions im hoping someone can answer. First Question is will it fit my sled? The sled is a 2010 Polaris Shift 600. Second question is will I have to change my drive cogs? Any information is greatly appreciated.

Thanks

Eric

Stinkey · 02-22-2012, 10:56 AM

Some one has to have done this before.

michahicks · 02-22-2012, 08:16 PM

Telepathic powers over the internet pretty rare. Might help if people had just a clue about what track you were talking about?

xscash · 02-22-2012, 08:43 PM

the reason noone is answering is because your question is vauge.....its the equivilent of asking "this guys is selling tires for my car, will they fit?"
the shift is available in a 121x15 track and a 136x15 track......which do you have? what are the specs on the new track your looking at.
the more info you provide the better an answer you will get.

iq shift 600 · 02-24-2012, 05:48 PM

im guessing its a 1.75' or 2' track... and i would say you would have to change your drivers i put a 1.25" on my 09 shift and it will rub when it is hoocking hard or if i jump it!

zimms · 02-24-2012, 06:13 PM

Quote:

Originally Posted by Stinkey

Hey guys I have the oppertunity to pick up a snow cross track studded and ready to go for $150. Before I buy the track I have a few questions im hoping someone can answer. First Question is will it fit my sled? The sled is a 2010 Polaris Shift 600. Second question is will I have to change my drive cogs? Any information is greatly appreciated.

Thanks

Eric

What snowmobile is the track from and how big are the lugs on the track. The cobra with a 1.385 lug and studs fit on a 2011 shift 600.

xscash · 02-24-2012, 09:06 PM

Quote:

Originally Posted by iq shift 600

im guessing its a 1.75' or 2' track... and i would say you would have to change your drivers i put a 1.25" on my 09 shift and it will rub when it is hoocking hard or if i jump it!

i have an 09 136 with 1.5 and no rub or issues

murf28 · 02-24-2012, 09:54 PM

I have a 1.25 inch rip saw on my 09 shift 600 and no rub issues.

steepndeep · 02-24-2012, 11:57 PM

I have an 08 Shift with a 155" x 2.4" paddle track and no clearance issues

Stinkey · 02-26-2012, 01:22 AM

Sorry guys its a 121 stupid post to not include the information in the first place.

02-22-2012, 12:19 AM	#1 (permalink)
Stinkey Super Advanced Member Join Date: Dec 2003 Posts: 430	2010 Shift 600 Hey guys I have the oppertunity to pick up a snow cross track studded and ready to go for $150. Before I buy the track I have a few questions im hoping someone can answer. First Question is will it fit my sled? The sled is a 2010 Polaris Shift 600. Second question is will I have to change my drive cogs? Any information is greatly appreciated. Thanks Eric __________________ Get r Done

02-22-2012, 10:56 AM	#2 (permalink)
Stinkey Super Advanced Member Join Date: Dec 2003 Posts: 430	Some one has to have done this before. __________________ Get r Done

02-22-2012, 08:16 PM	#3 (permalink)
michahicks Super Advanced Member Join Date: Feb 2005 Posts: 5,074 Current Sled(s): 06 600 HO Fusion Previous Sled(s): 07 600 IQ carb Location: Waterford and Gaylord Mi. Favorite Riding Area: Northern Lower and UP 10-11 Mileage: 1500 Age: 62 Riding Since: 1969	Telepathic powers over the internet pretty rare. Might help if people had just a clue about what track you were talking about? __________________ 600HO Fusion w/4 valve Air 2.0, HRP spindles, .359 torsion springs, X-Clicks, Retro graphics by ArcticFX, and Tempaflo

02-26-2012, 01:22 AM	#10 (permalink)
Stinkey Super Advanced Member Join Date: Dec 2003 Posts: 430	Sorry guys its a 121 stupid post to not include the information in the first place. __________________ Get r Done

02-22-2012, 08:43 PM	#4 (permalink)
xscash Super Advanced Member Join Date: Dec 2009 Posts: 296	the reason noone is answering is because your question is vauge.....its the equivilent of asking "this guys is selling tires for my car, will they fit?" the shift is available in a 121x15 track and a 136x15 track......which do you have? what are the specs on the new track your looking at. the more info you provide the better an answer you will get.

02-24-2012, 05:48 PM	#5 (permalink)
iq shift 600 Member Join Date: Jun 2011 Posts: 22 Blog Entries: 2	im guessing its a 1.75' or 2' track... and i would say you would have to change your drivers i put a 1.25" on my 09 shift and it will rub when it is hoocking hard or if i jump it!

02-24-2012, 09:54 PM	#8 (permalink)
murf28 Super Advanced Member Join Date: Dec 2009 Posts: 170 Current Sled(s): 2012 rush pro r 800 Previous Sled(s): f-7, indy 650, indy 500 mxz 600 shift 600 Location: rome ny Favorite Riding Area: rome area, tug hill , 11-12 Mileage: 1500 10-11 Mileage: 2600 Age: 43 Riding Since: 1985	I have a 1.25 inch rip saw on my 09 shift 600 and no rub issues.

02-24-2012, 11:57 PM	#9 (permalink)
steepndeep Member Join Date: Apr 2003 Posts: 23 Current Sled(s): 08 600 Shift 155" Previous Sled(s): 00 700 RMK, 91 Indy 500, 89 Indy 500, 89 Indy Trail, Location: Southeast Idaho Favorite Riding Area: Big Holes or Centenials 11-12 Mileage: 500 Age: 61 Riding Since: 1981	I have an 08 Shift with a 155" x 2.4" paddle track and no clearance issues

Remove Advertisements Sponsored Links
Hardcore Sledder Snowmobile Forums Advertisement