electric start kit for 06 fusion 600 HO

bluejackola · 02-01-2009, 11:11 PM

Where can I get this kit at? Was one offered or do I purchase the edge 600 kit?

sledless · 02-02-2009, 06:24 AM

edge electric start won't work on a 600 fusion
has to be for that perticular sled
i got mine from a dealer in new hampshire

cfm · 02-02-2009, 06:40 AM

A few yrs ago, I ended up buying the E-start kit for Polaris '06 600HO for $503 from Brian at discounthondaparts.com . Yes, a Polaris dealer. They are in NY.
Brian at www.Discounthondaparts.com
800-955-2925

I also got lucky and bought during their 'free shipping' special. All quotes I got around here was lowest of $550 with most at list of $599.95. Plus, I'd have to drive 30min+ each way though to get those.

Again, That was a few yrs ago. I'm sure prices have changed.

lcote73 · 02-05-2009, 08:48 PM

Quote:

A few yrs ago, I ended up buying the E-start kit for Polaris '06 600HO for $503 from Brian at discounthondaparts.com . Yes, a Polaris dealer. They are in NY.
Brian at www.Discounthondaparts.com
800-955-2925

I also got lucky and bought during their 'free shipping' special. All quotes I got around here was lowest of $550 with most at list of $599.95. Plus, I'd have to drive 30min+ each way though to get those.

Again, That was a few yrs ago. I'm sure prices have changed.[/b]

expect to pay alot unless u r gonna install it....i got a price when i bought my wifes sled.....800.00 installed . u gotta pull the motor to get it on....f.y.i.

cfm · 02-06-2009, 07:26 AM

Quote:

expect to pay alot unless u r gonna install it....i got a price when i bought my wifes sled.....800.00 installed . u gotta pull the motor to get it on....f.y.i.[/b]

I agree with expecting to pay a lot for install, but since i did it myself, I can 100% say that you do not have to pull the motor. The kit comes with detailed instructions and it doesn't even remotely tell you to pull the motor. No reason to with this set-up.

I would, however, pick up some y-pipe to head gaskets as removing the y-pipe will make things quicker.

BTW: The 600HO starter does not bolt to the engine like most other snowmobile's do. They remote mount the starter (under frt pipe) and use a flex shaft to turn the flywheel on the clutch.

xltier12 · 02-06-2009, 07:59 AM

Quote:

I agree with expecting to pay a lot for install, but since i did it myself, I can 100% say that you do not have to pull the motor. The kit comes with detailed instructions and it doesn't even remotely tell you to pull the motor. No reason to with this set-up.

I would, however, pick up some y-pipe to head gaskets as removing the y-pipe will make things quicker.

BTW: The 600HO starter does not bolt to the engine like most other snowmobile's do. They remote mount the starter (under frt pipe) and use a flex shaft to turn the flywheel on the clutch.[/b]

my buddys 570 artic cat is that way.now on my 700 you have to lift the motor at least.

michahicks · 02-06-2009, 08:00 AM

X2 on the don't have to remove the motor. I removed the Y pipe as well. I bought my kit from somebody that decided not to install after looking at the directions, think I paid close to 500. as well.

02-02-2009, 06:24 AM	#2 (permalink)
sledless Super Advanced Member Join Date: Jan 2007 Posts: 194 Location: New Brunswick	edge electric start won't work on a 600 fusion has to be for that perticular sled i got mine from a dealer in new hampshire __________________ 2006 yamaha attack 2006 fst classic 2006 600 fusion 2005 600 edge 2002 700 edge 1998 xcr 700 1994 xlt 1991 indy 650 1989 indy trail 1979 340 txl

02-02-2009, 06:40 AM	#3 (permalink)
cfm Super Advanced Member Join Date: Nov 2005 Posts: 1,069 Current Sled(s): 900 Fuse- 6000+miles and going Previous Sled(s): 06' 600HO M10 Location: New Hampshire Riding Since: BC	A few yrs ago, I ended up buying the E-start kit for Polaris '06 600HO for $503 from Brian at discounthondaparts.com . Yes, a Polaris dealer. They are in NY. Brian at www.Discounthondaparts.com 800-955-2925 I also got lucky and bought during their 'free shipping' special. All quotes I got around here was lowest of $550 with most at list of $599.95. Plus, I'd have to drive 30min+ each way though to get those. Again, That was a few yrs ago. I'm sure prices have changed. __________________ "Your motor will tell you what it wants. Are you listening ?" - Darin Morgan I did not vote for our current President. My YouTube Videos Click Here

02-06-2009, 08:00 AM	#7 (permalink)
michahicks Super Advanced Member Join Date: Feb 2005 Posts: 5,074 Current Sled(s): 06 600 HO Fusion Previous Sled(s): 07 600 IQ carb Location: Waterford and Gaylord Mi. Favorite Riding Area: Northern Lower and UP 10-11 Mileage: 1500 Age: 62 Riding Since: 1969	X2 on the don't have to remove the motor. I removed the Y pipe as well. I bought my kit from somebody that decided not to install after looking at the directions, think I paid close to 500. as well. __________________ 600HO Fusion w/4 valve Air 2.0, HRP spindles, .359 torsion springs, X-Clicks, Retro graphics by ArcticFX, and Tempaflo

02-01-2009, 11:11 PM	#1 (permalink)
bluejackola Super Advanced Member Join Date: Jan 2005 Posts: 183 Location: central PA.	Where can I get this kit at? Was one offered or do I purchase the edge 600 kit?

Remove Advertisements Sponsored Links
Hardcore Sledder Snowmobile Forums Advertisement